TL642D Telehandler
The TL642D is precision engineered to handle any task, offering stability, maneuverability, speed and power in any application.
Operating Specifications
- Rated Load Capacity
- 6500lb
- Maximum Lift Height
- 42ft
- Maximum Forward Reach
- 30ft
- Top Travel Speed
- 21mile/h
- Turning Radius - Over Tires
- 12ft
- Frame Leveling
- 10°
- Drawbar Pull - Loaded
- 19783lbf
- Capacity at Maximum Height
- 6500lb
- Capacity at Maximum Reach
- 700lb
Engine
- Engine Model
- Cat® C3.4B
- Gross Power - Basic
- 100HP
- Note
- Meets U.S. EPA Tier 4 Final emission standards.
Weights
- Operating Weight
- 22002lb
Tires
- Standard
- 370/75-28 Air Duraforce
- Optional (4)
- 13.00 × 24 Solid
- Optional (3)
- 13.00 × 24-12 PR Foam Filled
- Optional (2)
- 13.00 × 24-16 PR Air
- Optional (1)
- 370/75-28 Foam Duraforce
Service Refill Capacities
- Fuel Tank
- 38.3gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 5.7gal (US)
- Hydraulic System
- 40gal (US)
Boom Performance
- Boom Up
- 15s
- Boom Down
- 10.3s
- Tele In
- 9.5s
- Tele Out
- 16.3s
Work Tools
- Carriages - Side Shift
- 48in
- Carriages - Dual Fork Positioning
- 50in
- Carriages - Standard Rotate
- 50in
- Carriages - Standard Tilt
- 50in
- Carriages - Swing
- 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
- Carriages - Wide Rotate
- 72in
- Carriages - Wide Tilt
- 72in
- Cubing Forks
- [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
- Hydraulic IT Coupler
- Includes Auxiliary Electrics
- Lumber Forks - Option 1
- [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
- Lumber Forks - Option 2
- [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
- Pallet Forks - Option 1
- [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
- Pallet Forks - Option 2
- [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
- Pallet Forks - Option 3
- [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)
Transmission Speeds
- Reverse
- 3 speed
- Forward
- 4 speed
Hydraulic System
- System Operating Pressure
- 3770psi
- Note
- Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
- Auxiliary Hydraulic Pressure
- 3481psi
- Auxiliary Hydraulic Flow
- 18gal/min
- Gear Pump
- Single-section
Axles
- Type (1)
- Trunnion mounted planetary 55 degree steer axles.
- Type (2)
- High bias limited slip differential on front axle.
Braking System
- Service Brakes
- Inboard wet disc brakes on front and rear axles
- Parking Brakes
- Wet disc, spring applied hydraulic release on front axle